True shooting percentage and effective field-goal percentage, explained
Field-goal percentage treats a three and a layup as the same shot. Learn the formulas, the worked examples and the limits of effective field-goal percentage and true shooting percentage.
For most of basketball history, the number that told you whether someone could shoot was field-goal percentage: makes divided by attempts. It is simple and it is on every box score. It is also quietly unfair, because it treats every made shot as one unit of success, even though the game does not. A made three-pointer is worth 50 percent more than a made two. A trip to the free-throw line produces points without registering as a field-goal attempt at all. A player who makes 45 percent of his shots by living behind the arc might be a far better scorer than a player who makes 52 percent of his shots by living at the rim, and the plain percentage cannot tell you.
Two statistics were built to repair that. Effective field-goal percentage, usually written eFG%, adjusts for the extra value of the three. True shooting percentage, written TS%, goes further and folds in free throws. Both are now standard on every serious stats page, and both are short enough that any fan can compute them on the back of a napkin.
This article gives the formulas, works through examples including one famous game, explains why the odd-looking 0.44 appears again, and covers what the two numbers do and do not tell you. If you have read about points per possession, these are the shooting-specific versions of the same idea: not how many points, but how many points for the resources spent.
The problem with field-goal percentage
Start with what raw field-goal percentage hides. Imagine two shooters over the same ten attempts.
Shooter A takes ten two-point shots and makes five. He scores 10 points and shoots 50 percent. Shooter B takes ten three-point shots and makes four. He scores 12 points and shoots 40 percent. By the standard percentage, Shooter A is the better shooter. By the scoreboard, Shooter B produced more points from the same number of attempts.
Both of those shooters used the same number of attempts, and attempts are the scarce resource, because each shot ends or extends a possession. The best test of a shooter, then, is not what fraction of his shots dropped but how many points each shot produced. That is the question both eFG% and TS% answer. The difference between them is how many sources of points they count.
The problem got worse as the sport changed. In the 1980s and early 1990s, the three-pointer was a minor weapon, so raw field-goal percentage was a fair rough guide. As teams began to take large numbers of threes, the plain percentage began to misrepresent who was efficient. A guard who took half his shots from three and made 36 percent of them could post a field-goal percentage in the low 40s that looked mediocre while being an excellent offensive player. The correction mattered more with each passing year.
Effective field-goal percentage
The formula for eFG% is:
eFG% = (field goals made + 0.5 × three-pointers made) ÷ field-goal attempts
The 0.5 is the whole trick. Every made three is counted as one and a half made shots rather than one. The logic is that a three is worth 1.5 times a two, so you give the shooter the extra half credit when he makes one. The result is the field-goal percentage a two-point shooter would have needed to produce the same points per attempt.
Run it on the earlier example. Shooter B made four threes in ten attempts. His effective field-goal percentage is (4 + 0.5 × 4) ÷ 10, which is 6 ÷ 10, or 60 percent. Shooter A made five twos in ten attempts, which is 50 percent. The ranking flips, and it flips in the direction of the scoreboard.
A second example uses a single game. A player goes 10 for 20 with 5 of the makes coming from three. His raw percentage is 50. His effective percentage is (10 + 2.5) ÷ 20, or 62.5 percent. Another player goes 12 for 20 with no threes. He shoots 60 percent in the plain sense and 60 percent in the effective sense. The first player, who looked worse, scored 25 points on 20 shots from the field. The second scored 24. Close, but the first was a little ahead per attempt.
There is a convenient way to read eFG%: multiply it by two and you have points per field-goal attempt, ignoring free throws. A 50 percent eFG% means one point per shot. A 55 percent eFG% means 1.1 points per shot. That connects directly to the way offense is judged elsewhere on this site.
The statistic is limited in what it covers. It measures only field-goal attempts, so it cannot see free throws. It does not see turnovers, assists or offensive rebounds. And by treating a three as simply worth 1.5 times a two, it assumes that a player's value comes only from the points produced by the shot itself. That assumption is fine for comparing shooting efficiency but incomplete for the whole offensive picture.
True shooting percentage
True shooting percentage extends the same reasoning to free throws. The formula is:
TS% = points ÷ (2 × (field-goal attempts + 0.44 × free-throw attempts))
Read it as follows. The denominator is twice the number of "scoring attempts," where a scoring attempt is a field-goal attempt or the fraction of a free-throw attempt that is likely to have ended a possession. Multiplying by two puts it on the scale of two-point shots. Points divided by that denominator is then the share of the maximum two points per attempt that the player actually collected.
Consider a player who scores 30 points on 20 field-goal attempts and 10 free-throw attempts. The denominator is 2 × (20 + 4.4), which is 48.8. His true shooting percentage is 30 ÷ 48.8, or about 61.5 percent. Now consider a player who scores 30 points on 25 field-goal attempts and 4 free-throw attempts. His denominator is 2 × (25 + 1.76), or 53.52, and his true shooting is 30 ÷ 53.52, or about 56 percent. Same points, very different efficiency, and the gap is clearly visible in the TS% figure while the box score would show two 30-point games.
In practice, TS% has a handy interpretation. Divide it by 100 and multiply by two, and you get points per scoring attempt. A true shooting percentage of 60 percent means 1.2 points per attempt, which is well above the average possession value in any recent era. A figure around 50 percent means 1.0 points per attempt, a number that would be a problem on a team that wants to score efficiently.
Why 0.44 shows up again
If you have read about counting possessions, the 0.44 will look familiar. It is the same adjustment, for the same reason.
A free-throw attempt is not a shot that ends a possession the way a field-goal attempt is. Free throws come in groups: a pair after a shooting foul on a two, three after a foul on a three, and singles after and-ones or technical fouls. If you counted every free-throw attempt as a full possession, you would greatly overstate the number of trips a player or a team used. If you ignored them, you would understate it. Researchers looked at large numbers of games and found that, on average, a free-throw attempt corresponds to roughly 0.44 of a possession ended. So TS% counts each free-throw attempt as 0.44 of a shot.
The number is not exact for every player. A player who is fouled mostly on three-pointers, or who gets to the line on a lot of and-ones, will have a different true conversion than one who is fouled mostly on two-shot trips. And rules matter: in a year when the bonus structure or the number of free throws awarded for certain fouls changes, the factor moves slightly. But across league-wide samples it is close enough that nearly every site uses it, and it is accurate to within a couple of hundredths in most seasons.
A famous game, measured
The most famous scoring game in basketball history is a good test of what true shooting percentage adds. On March 2, 1962, Wilt Chamberlain scored 100 points for Philadelphia against the New York Knicks. The story of that night has been told many times, and the key shooting line is well recorded: he made 36 of 63 field goals and 28 of 32 free throws.
On field-goal percentage alone, 36 of 63 is a bit over 57 percent, a very good figure for the time. But the free throws are what stand out. Chamberlain was a poor free-throw shooter for his career, making roughly half of his attempts, and that night he made about 88 percent, a personal outlier. Run the true shooting formula and the denominator is 2 × (63 + 0.44 × 32), which is 2 × 77.08, or 154.16. Dividing 100 by 154.16 gives about 65 percent. That is an excellent efficiency on a huge volume. The result shows what the statistic does: it recognizes that the free throws were a large part of the points and that they were produced at a high rate.
Chamberlain did not have an effective field-goal percentage that differed from his plain percentage, because there were no three-pointers in the NBA of 1962. This is a reminder that eFG% depends on the shot being available at all. When you compare players from before the three-point line existed, eFG% and plain field-goal percentage are the same number, and the extra value of the long shot is not part of the comparison. It is one of several reasons that cross-era ranking of shooters needs care.
Reading the numbers: what counts as good
Neither statistic has a fixed good line, because the league average has moved over time. In the early years of the league, shooting percentages were low by modern standards; the average rose through the decades as shot quality, training and spacing improved, and the three-point shot added an efficiency boost to the league-wide figures. In recent years, the league-wide true shooting percentage has sat in the mid-50s, comfortably above where it stood in earlier eras.
Because the average is a moving target, the more reliable way to judge a player is relative to the league average in his own season. A true shooting percentage a few points above average is a strong figure. Ten points above average is exceptional and often signals a player who gets to the line, or finishes at the rim, or hits threes at a high rate while taking a limited number of difficult shots. The leaders on the leaders page, and the profiles of players in the players section, are best read with that context in mind.
The two statistics also favor different types of players, and that is useful to know.
- Centers and finishers often post the highest effective field-goal percentages in the league, because most of their shots are dunks and layups. A high eFG% for a big man mostly reflects shot location rather than skill at hitting hard shots.
- High-volume guards and wings are typically judged on true shooting, since they spend a large share of their possessions at the line. A player who draws many fouls can have a moderate eFG% and an excellent TS%. The relationship between fouls drawn and efficiency is covered in the article on free-throw rate.
- Specialist shooters often have excellent eFG% because a three-pointer made at a decent rate carries a high per-shot value.
What these numbers do not tell you
The efficiency of a player's shots is one part of offense, and it is easy to give it too much weight. There are several things that neither eFG% nor TS% captures.
Shot difficulty. Two players can have the same true shooting while one takes shots created by teammates and one creates his own against set defenses. The second player has done something harder, but the percentage cannot say so. Tracking data now allows analysts to estimate the quality of a shot attempt, as in the work on expected points and shot quality, but the standard percentages do not.
Volume. A player who shoots 65 percent on six attempts a game is efficient, but he is not carrying much of the offense. The question of how much of an offense a player uses is handled by usage rate. Efficiency and usage need to be read together, because a player who maintains high efficiency while using a lot of his team's possessions is much rarer than one who is efficient in a limited role.
Turnovers and passing. A player can post a superb true shooting percentage and still hurt his team with careless giveaways. The percentage looks only at shots and free throws.
Context and opponents. Shooting efficiency depends on teammates who space the floor, on the quality of the defenses faced, and on the role in the offense. Those effects do not show up in the formula.
Sample size. A hot month can lift a player's true shooting several points. As the article on small samples explains, shooting percentages need a large number of attempts to settle, and three-point percentage in particular is noisy over short stretches.
How the numbers are used
Analysts rarely use these two statistics alone. They show up as components in larger measures. The shooting factor in the four factors is effective field-goal percentage, for both a team's offense and its defense, and it is weighted most heavily of the four. True shooting enters the all-in-one measures discussed in win shares, BPM and VORP in one form or another, because those measures need a way to credit made threes and free throws properly.
On the team side, a defense is judged by the effective field-goal percentage it allows. A defense that forces a lot of long twos is making the offense's shooting less efficient even if the opponents' plain percentage is unremarkable. A defense that gives up many threes at a decent rate may be giving up more points than the plain figures suggest. The same arithmetic applies to the opponent's shooting as to your own.
The two measures also expose the logic behind "50-40-90" seasons, in which a player shoots at least 50 percent from the field, 40 percent from three and 90 percent from the line. The line is a famous benchmark, and a handful of players have reached it, including Steve Nash on more than one occasion. But the benchmark has a quirk: it uses plain field-goal percentage, so a player who reaches 50 with a fair number of threes is more efficient than the benchmark implies, while a big man who gets to 50 on dunks is not. Many analysts would say true shooting tells the story of a season more completely than any set of three round numbers.
Putting it to work
A practical way to use these statistics is to keep a short routine.
- Start with true shooting percentage for the overall efficiency picture.
- Compare it with the league average for that season, not with a fixed number from memory.
- Check the player's volume, using attempts per game or usage, to see how much of the offense depends on that efficiency.
- Look at effective field-goal percentage separately if the question is about shot-making rather than foul-drawing, or if you are comparing a player to a team's defense.
- Treat anything from a short stretch as provisional.
With that routine, most of the arguments that come up on a typical night resolve quickly. A player who scores 28 points on a high true-shooting figure is having a very good game. A player who scores 28 on a below-average figure and many shots is having a harder night than the headline suggests.
What to take away
Field-goal percentage is a fine starting point, but basketball pays out in points, and points come from threes and free throws as well as twos. Effective field-goal percentage fixes the first gap by giving credit for the longer shot. True shooting percentage fixes both by adding free throws through the 0.44 factor. They are easy to compute, easy to read as points per attempt, and far more faithful to what the scoreboard actually records.
Use them for what they are: measures of how well shots turned into points. They do not say how hard the shots were, how many the player took, or what else he did with the ball. Paired with usage and context, though, they answer the question that matters most about a scorer, which is whether the points were worth the possessions it took to get them.