The ball: sizes, materials and why leagues differ
The basketball itself, from its soccer-ball origins to modern leather and composite designs, with the sizes used by men, women and children, how inflation is checked, and why a famous 2006 change was reversed.
The basketball is the one piece of equipment that every player touches on every possession, and almost nobody thinks about it. It is round, it is orange or close to it, and it bounces. Yet the ball has a history, a set of specifications that differ from league to league, and a record of at least one spectacular design failure. A ball that is a fraction too heavy or too slick changes how a shooter feels, how a ball handler controls the dribble and how a game is played.
This article looks at the ball closely. We start with where it came from and how it changed, then lay out the sizes used by men, women and younger players. We explain what a ball is made of, why leather and composite materials behave differently, and how inflation is specified. We tell the story of the ball the NBA introduced in 2006 and took back within weeks. And we end with practical advice about choosing a ball and the differences between a ball for the gym and one for the playground.
The measurements below are those in the major rulebooks, and they are stable enough to rely on. Where a manufacturer, brand or supply contract is involved, those arrangements change, and we say so.
From soccer ball to purpose-built basketball
When James Naismith invented basketball in 1891, he did not have a basketball. He needed a ball that could be thrown and caught by hand and passed between players, and the soccer ball available in the Springfield gym did the job. For the first few years the game was played with soccer balls. They were made of leather panels sewn together around an inner bladder, closed with a lace, and they were not designed to be dribbled. In the earliest games, dribbling was not part of the sport at all; players passed the ball and moved it by throwing. Our article on Naismith and the invention of the game tells the story.
As the sport spread, manufacturers began making balls built for it. In the mid-1890s a sporting goods company produced a ball intended specifically for basketball, larger than a soccer ball. The early versions were still laced, and the lace made them awkward: a dribble that landed on the lace would bounce unpredictably, and a shot could be thrown off by the raised seam. Over the following decades makers moved away from laces to molded designs with a sealed valve, which made the surface smooth and allowed the ball to be inflated with a needle.
The color changed too. Early balls were brown, the natural color of the leather. They were hard to see, particularly for spectators in the upper rows of a gym. A well-known story credits Tony Hinkle, the longtime Butler coach, with pushing for an orange ball in the 1950s so that it could be seen more clearly. The orange ball became the standard in the United States. The ABA, the league that competed with the NBA in the 1970s, went the other way and made its ball red, white and blue, a trademark of the league that fans of the era remember. We cover that league in the ABA, the red, white and blue ball and the doctor.
Today the ball has eight panels separated by channels, and a pebbled surface that gives the fingertips something to grip. The pebbling and the channels are not decorative. They help a player control the ball when his hands are damp, and they affect how the ball rotates in flight.
The sizes
Basketballs come in sizes that are labeled by number, and the numbers correspond to the circumference of the ball. The largest and most common is size 7. Smaller sizes exist for women and for younger players.
| Size | Typical user | Circumference |
|---|---|---|
| 7 | Men's professional, college and high school (boys) | About 29.5 inches |
| 6 | Women's professional, college and high school (girls); some youth | About 28.5 inches |
| 5 | Younger players | About 27.5 inches |
The NBA ball is 29.5 inches around and weighs about 22 ounces. The WNBA ball and the ball used in women's college and high school basketball is 28.5 inches around and a little lighter, about 18 to 20 ounces. Men's college and boys' high school basketball use the same size as the NBA. International rules under FIBA use the same pair of sizes, with the men's ball in size 7 and the women's ball in size 6, and they specify the circumference and weight in metric units. A size 7 ball under FIBA rules measures roughly 75 to 78 centimeters around and weighs roughly 570 to 650 grams; a size 6 ball is smaller and lighter on both counts. The sizes for younger children go down further, and a size 5 ball is commonly used for the youngest players learning the game.
The reasoning behind the sizes is control. A ball should fit the hand, and a smaller hand needs a smaller ball to palm, grip, dribble and shoot consistently. The women's ball is designed around the average size of the hands that use it, not around any idea that the women's game is less skilled. A player who handles a ball that is too big for her hand will struggle with the same fundamentals, and a ball that is too small for a large hand loses some of the feel that shooters value.
There is one more ball worth knowing. The three-on-three game that debuted at the Olympics uses a ball that is a mix: it is the size of the women's ball but has the weight of the men's ball, a deliberate choice that makes it easier to handle in the tight spaces of a half-court game without being so light that it floats. For the game in detail, see how Olympic 3x3 works.
For a look at how the women's pro game handles its rules and equipment, see our article on WNBA rules and how the women's pro game differs.
Leather, composite and rubber
A basketball's cover may be made of one of three materials, and each behaves differently.
Leather. The traditional cover is genuine leather. It has a feel that many players love: soft, with a texture that grips the fingers and improves as the ball breaks in. A new leather ball can feel slick until it has been played with for a while, and with use the surface develops a character of its own. Leather is more expensive and more sensitive to moisture and dirt, and it is intended for indoor courts. Playing on rough outdoor concrete wears the surface quickly. The NBA ball is made of leather.
Composite. Composite or synthetic leather is made of layered materials that mimic the feel of leather. A good composite ball does not need to be broken in, it keeps its grip in a wider range of conditions, and it lasts longer. Many college and high school games are played with composite balls, and a number of recreational players prefer them for their consistency. The tradeoff is that serious shooters often say a composite ball has a different, slightly harder feel on the fingertips.
Rubber. Rubber covers are made for outdoor courts. They are durable and inexpensive, they take the beating that a ball suffers on asphalt, and they are standard at playgrounds. The surface is less sensitive than leather, and it does not respond to the hand in the same way. Our guide to basketball gear explains how to choose among them.
Inside every ball is a rubber bladder, which holds the air, and a layer of windings or lining between the bladder and the cover, which gives the ball its shape and its bounce. The quality of that inner construction is a big reason that a good ball keeps its shape and a cheap one goes lopsided.
Inflation and the bounce
A ball's inflation is as important as its size. A soft ball dies on the floor and makes a dribble sluggish, while an overinflated one bounces too high and is hard to control. Rulebooks specify the right range.
The NBA specifies an inflation pressure of 7.5 to 8.5 pounds per square inch. FIBA takes a more practical approach, one that does not require a gauge. A ball is considered properly inflated if, when dropped from a height of 1.8 meters, measured to the bottom of the ball, it rebounds to a height of between 1.2 and 1.4 meters, measured to the top of the ball. A referee or a table official can test it with a tape measure and a steady hand. The method is a nice illustration of how rule makers think: the point of inflation is the behavior of the bounce, so the rule tests the bounce.
For a recreational player the lesson is straightforward. Check the pressure periodically, because a ball loses air over time, and avoid overinflating it. Many balls print a recommended pressure range near the valve, and an inexpensive hand pump with a gauge makes it easy to stay inside it. If a ball feels dead on the floor, it probably needs more air.
Brands and the supply contract
The ball a league uses is supplied under a contract with a manufacturer, and those contracts change. For decades one American sporting goods company supplied the NBA's official ball. It held that role from the early 1980s into the 2020s, and the ball with its logo was a fixture of the league. Then the league moved to a different manufacturer, which became the NBA's ball supplier starting with the 2021-22 season. College basketball and the national tournaments have also had official ball suppliers over the years, and international competitions have their own arrangements, with a Japanese manufacturer well known for supplying balls to FIBA events.
The lesson is that the identity of the supplier matters less than the specification. Whatever the brand, the ball must meet the dimensions and bounce standards in the rulebook. That is why a league can change suppliers without changing the game: the contract is for the manufacturing, and the rules are for the product.
The ball that lasted a couple of months
The most famous design failure in recent basketball history is the NBA's synthetic ball of 2006. In an attempt to improve consistency, the league introduced a new official ball for the 2006-07 season made of a microfiber composite material instead of leather. The idea was that a synthetic cover would be more uniform from ball to ball and wouldn't need to be broken in. The league argued that the ball was an improvement.
Players disagreed, and loudly. They said the ball felt different, that it was slippery when dry, that it bounced differently and that it cut their fingers. Complaints came from stars and role players alike, and the players' union raised the issue publicly. The league listened. Within about two months it announced that it would go back to the leather ball, and the leather ball returned on January 1, 2007. The synthetic ball had lasted only about two months.
The episode taught a lesson that is useful for anyone who designs equipment. A ball is not just a specification. It is something that players handle thousands of times, and their feel for it is built up over years. A change that looks like an improvement on paper can undo that feel. It is also a reminder that the athletes who use the equipment know things the specification does not, such as how a surface behaves after a dozen dribbles with sweaty hands.
Why the ball differs from one league to the next
Put the pieces together and the reasons for the differences become clear.
- Hand size and skill level. The ball is sized to the hands that use it. This explains the women's and youth sizes.
- Tradition. The size 7 ball is the descendant of the early balls and has been standard for the men's professional game for generations.
- Playing surface. Indoor leagues use leather or composite. Outdoor play calls for rubber.
- Visibility and broadcasting. The orange color came from the need to see the ball. Designs that emphasize contrast and visibility on television have followed.
- Commercial arrangements. The manufacturer changes with the contract, but the specification does not.
Underneath these reasons is a common thread: every league wants the ball to behave predictably. That is why the specification covers circumference, weight, inflation and bounce, and why each ball is tested before it goes into play.
Choosing a ball
A short guide for someone buying a ball for practice.
- Match the size to the player. An adult man uses size 7, an adult woman usually size 6, and younger players should use the size recommended for their age group. Playing with a ball that is too large builds bad habits.
- Match the surface to the court. Use a composite or leather ball indoors and a rubber ball outdoors. An indoor ball used on concrete wears quickly.
- Check the inflation. A properly inflated ball bounces consistently, and shooting with a ball that is soft or hard changes the arc.
- Keep it clean. A ball that is dusty or wet loses grip. Wipe it down, and store it away from heat and cold.
- Practice with the ball you will play with. If you will compete with a particular size, train with it, because the feel is part of the skill.
For training ideas that use the ball, our guides to ball-handling drills and shooting form are good places to begin.
What to take away
The basketball is a small piece of engineering that has been tuned over more than a century. It began as a borrowed soccer ball, became a specialized object with panels and channels, changed color so that crowds could see it, and now exists in sizes that are matched to the hands of the people who use it. Its specification is precise, because the way it behaves determines how the game is played.
The next time you watch a game, notice the ball. Notice the way it comes off a shooter's fingers, the way it rotates, and the way it bounces off the floor. And remember that the person who designed its panels and its pebbling, and the officials who checked its inflation, did so to make that moment possible.
If you want to see the ball in use at different levels, our WNBA page and NBA page cover the leagues that use the two professional sizes.