All scores →
Loading…
Loading…
Loading…

Off-ball movement: cuts, screens and relocation

By 4Basketball Staff · · 11 min read

What the four players without the ball are doing and why it matters: the main types of cuts and screens, how players relocate to keep the floor balanced, and how to watch for it in a game.

On any given possession, one player has the ball and four do not. Most of the attention goes to the one. The camera follows him, the commentator describes him, the highlight shows his move. Yet the four who do not have the ball often decide whether the possession succeeds. They are the ones who create space, set the traps, pull defenders away and arrive at the right place at the right time to receive a pass.

Off-ball movement is the collective name for what they do. It covers cuts to the basket, screens for teammates, drifts along the arc, and relocations after a shot or drive. It is not glamorous, and a casual fan may not notice it at all. But a team that moves well without the ball is very hard to guard, and a team that stands still is easy.

This article names the main actions, explains what each is designed to do, shows how they combine into the patterns coaches teach, and gives you a way to watch for them. It also makes a broader point: that good off-ball movement is less about running than about reading, about knowing where to be when something changes.

Why movement without the ball matters

Defenses are built on a simple idea: each defender is responsible for an offensive player, and all five together protect the basket. When the offense stands still, the defenders can see both the ball and their man at once, and they can help each other with little risk. When the offense moves, that comfortable view disappears. A defender must decide whether to follow his man, switch with a teammate or stay in the lane, and every decision carries a risk.

Movement also creates gravity, a term used for the pull a player exerts on defenders. A great shooter running along the arc pulls his defender with him, and perhaps another defender who worries about his shot. That pull leaves space for teammates. The shooter does not need the ball to help the offense; his movement alone is a contribution.

A third benefit is timing. Movement lets a team arrive at a good shot at the right moment. A cut that arrives a half-second after the pass is too late, and one that arrives before the pass is wasted. Teams that practice together learn each other's rhythms, which is part of why familiarity matters so much in team offense.

Finally, movement makes the ball move. Passes follow movement, and an offense in which players cut and screen creates more passing options than one in which they stand. The best offenses have both: the ball moves from player to player, and the players move around the ball. The overall philosophy is described in Motion offense: how five players move without a play call.

The cut

A cut is a purposeful run by an offensive player to a new spot on the floor. Cuts have several purposes: to get open for a pass, to draw a defender away, to clear space for a teammate or to attack the basket. There are several types.

The basket cut

A basket cut is a run to the rim, usually when the defender looks away or the ball handler has an open pass. The cutter takes the shortest line to the basket and holds his hands ready for the pass. The cut is effective when the defender is watching the ball and loses track of his man. This is called "ball-watching," and good teams punish it.

The backdoor cut

A backdoor cut is a sudden move to the basket behind a defender who is overplaying, that is, standing between his man and the ball to deny a pass. The cutter takes a step toward the ball, as if to receive it, and then spins and runs toward the rim. The passer delivers the ball in the space the defender has left. It is one of the oldest tricks in basketball and a staple of the systems described in The Princeton offense: backdoor cuts and the thinking player's system.

The V-cut and L-cut

When a defender denies a pass, the offensive player uses a V-cut or L-cut to get open. In a V-cut, the player takes a step toward the basket and then breaks sharply back out toward the ball, forming a V. In an L-cut, he runs along the lane line and then turns at a right angle toward the wing. Both force the defender to commit one way, then change direction, giving the cutter a step of separation.

The flash cut

A flash cut is a quick move into the open space in the middle of the floor, usually to the free throw line, to receive a pass. It is often used against zones, where the middle is the weak point, and against man-to-man defenses that collapse on a drive. The ball handler gets an outlet, and the player catches the ball in a position to shoot, pass or drive.

The give-and-go

A give-and-go is a pass followed by a cut. The player passes the ball to a teammate, cuts toward the basket and receives a return pass. It is one of the first plays children learn, and it remains effective because defenders still lose track of a man after he passes. The lesson is that the ball and the player should move together.

Timing the cut

One more idea: a good cut is as much about timing as speed. A cutter who waits for the right moment, when the defender's eyes leave him or the help defender turns to the ball, beats a faster cutter who moves too soon. The best cutters have a sense of the defense's attention, and they move when it lapses.

The screen

A screen, also called a pick, is a legal block set by an offensive player to free a teammate by obstructing a defender. Off the ball, screens are among the most useful tools for creating shots. The key rule is that the screener must be stationary, with his feet planted, when contact occurs, or the referee may call a moving screen foul.

The down screen

A down screen is set by a player near the basket for a teammate who is positioned farther from it, usually a shooter. The shooter runs from the baseline or lane toward the three-point line, using the screen to shake his defender. This is the foundation of many plays for shooters: the shooter runs up, curls tight around the screen, and catches the ball facing the basket. Reggie Miller, Ray Allen and a long line of shooters made careers using these screens.

The pin-down

A pin-down is a down screen that is set to "pin" the defender against the screener, forcing him to fight through. It is similar in concept, and the two terms are often used interchangeably. The difference is mostly emphasis: the pin-down is a hard screen meant to disconnect the defender entirely.

The flare screen

A flare screen is set for a shooter moving away from the ball, often toward the corner or wing. The screener sets the screen on the side nearest the ball, and the shooter "flares" away from the screen to receive a pass on the opposite side. Flares are effective against defenders who go under the screen or stay close, as the shooter can get open on the perimeter.

The back screen

A back screen is set from behind the defender, so that he does not see it coming. Back screens are often used to free a cutter heading to the basket, and they work especially well against defenders who are watching the ball. A screener who slips quietly behind a defender can create an easy layup.

The cross screen

A cross screen is set across the lane, usually for a player cutting from one side of the floor to the other. It is common in post offenses, where a big man is freed to receive the ball close to the basket.

The staggered screen

A staggered screen consists of two screeners set one after the other, in a line or with a gap between them. The shooter runs past both, which makes it much harder for a defender to follow. The shooter can curl, fade or pop depending on how the defender plays. Staggered screens are a favorite of coaches designing plays for elite shooters.

The ghost screen and the slip

A ghost screen is a fake screen: the screener approaches as if to set a pick but slips away before contact. A slip, similar in concept, occurs when the screener cuts to the basket before the screen is complete. Both exploit a defender who is reacting to the expected screen. They are particularly effective against switching defenses, which are discussed in Switch-everything defense and its weakness: mismatches.

Relocation: what happens after the shot

Relocation is the least visible kind of off-ball movement and one of the most valuable. When a teammate drives, shoots or passes, the other players adjust their positions to keep the floor balanced. A shooter whose defender has stepped into the lane to help moves to an open spot on the arc. A player in the corner lifts to the wing to give the driver a passing target.

The principle is simple: move to where the ball handler can pass to you. Defenders on the weak side often drift toward the paint to help, and the offensive players drift away from them. When the ball handler drives, the players around him spread and create angles. When the drive is stopped, they swing the ball to the next open man.

Common relocation habits include:

  • The drift. A player on the wing or corner slides along the arc to a gap between defenders, usually when a teammate drives toward the basket.
  • The lift. A corner player moves up to the wing to give the ball handler an outlet pass.
  • The slide. A player on the wing slides down to the corner when the ball handler drives to his side, creating a pass for a corner three.
  • The fill. A player moves into the spot vacated by a teammate to keep the floor balanced.
  • The reset. When a drive is shut down, the offense gives up the sequence and rebalances so the ball can be reversed.

The drift, lift and slide are three versions of the same idea: keep the lanes open and the passing angles clear. A team that does not relocate allows defenders to help freely and clog the lane. Spacing is described in Pace and space: how the three-point shot reshaped spacing.

Putting it together: a few classic patterns

Individual actions combine into the patterns coaches use.

Pin-down into a handoff. A shooter runs off a down screen to the wing, receives the ball and either shoots or hands it to a teammate coming off a second action. The combination keeps the defense moving.

Screen the screener. A player sets a screen and then receives a screen himself, usually from the player he just freed. This is the signature of the flex offense, in which a basic pattern of back screens and down screens produces continuous movement. It is described in The flex offense and the screen-the-screener tradition.

Cut and replace. A passer cuts to the basket, and another player replaces him in the spot he vacated. The cycle continues, and the ball moves around the perimeter. This is the logic of the motion offense associated with coaches like Bob Knight, whose approach is covered in Bob Knight: motion offense, discipline and controversy.

The dribble handoff. A player dribbles toward a teammate and hands him the ball, using the handoff as a moving screen. It has become a signature action of the modern game, and it is explained in The dribble handoff: the modern offense's quiet workhorse.

Spain and stack actions. Advanced sets add a back screen on the screener of a pick and roll, which creates movement behind the primary action, as described in Spain pick and roll and stack actions.

Reading and spacing: the thinking behind the movement

Good off-ball movement is not random. It follows from reading the defense.

The first read is the position of the defender. If he is playing close, a cut behind him works. If he is playing off, a quick step toward the ball and a shot can work. If he is going under screens, the shooter should pop out and shoot. If he is chasing over the top, a curl to the basket is better.

The second read is the position of the help defense. If the help defender is turned to the ball, a cut behind him is open. If he is ready, the cutter may hold off.

The third read is the spacing. Players should not cut into a space occupied by a teammate, because it clogs the lane. The cutter's job is to find the empty area, and the other players' job is to keep it empty.

The fourth read is timing. The best moves happen when the ball handler is ready to pass. A cut that arrives while the ball handler is looking elsewhere is wasted. This is why teams that play together improve: they learn when a teammate is looking and when he is not.

The older generation of coaches taught off-ball movement through drills and rules, such as "pass and cut" or "screen away." Modern teams add film study and analytics, tracking how often a player moves and how often those movements produce a shot. Either way, the central idea is the same: movement should be purposeful.

How to watch off-ball movement

If you want to see this part of the game, try an experiment. Choose a possession and ignore the ball. Watch only the four players without it.

  1. Who moves? Count how many of the four are moving at any one time. In a good offense, at least two are in motion.
  2. Where do they go? Are they cutting toward the basket, running along the arc or setting screens?
  3. Who follows them? Notice which defenders chase and which stay home. Chasing defenders are being pulled.
  4. What opens up? After a movement, see where the space appears and who uses it.
  5. What does the shooter do? A good shooter keeps moving until the pass arrives, then stops quickly and shoots.

You will start to see how a shot that looks like a simple catch-and-shoot began three passes earlier with a screen in the corner.

What to take away

Off-ball movement is the part of offense that fans see least and coaches value most. Cuts attack the basket and the defender's attention. Screens free shooters and cutters. Relocation keeps the floor balanced and the passing lanes open. Together they turn a standing offense into a moving one, and a moving offense is much harder to defend.

The practical lesson, for players, is that you contribute to the offense whether or not you have the ball. A player who cuts at the right moment, sets a solid screen or shifts to an open spot does as much as the one who scores. And for the fan, the lesson is to watch the other four. The next time you see an easy layup or an open three, rewind in your mind and look at who moved before the pass. For player shooting numbers that reflect this work, see the players page.

Search more on this

Keep reading

How coaches adjust in a playoff series, game to game

A playoff series is a chess match played over seven games. Here is how coaches scout, change lineups and coverages, and counter each other's counters, with examples from the Finals of 1991 and 2015.

4Basketball Staff · May 23, 2026 · 11 min read