Inbounds plays: baseline and sideline out-of-bounds sets
Out-of-bounds plays give coaches a rare chance to script a possession. This guide covers the rules, the main baseline and sideline sets, how defenses respond, and the last-second plays that decided famous games.
For most of a basketball game, a coach cannot script anything. Players react, defenses adjust and possessions unfold in ways nobody drew on a board. An out-of-bounds play is the exception. The ball is dead, the offense chooses where everyone stands, and the defense has only a few seconds to respond. For those few seconds, the coach is in control, and a well-designed set can produce an open shot that would be hard to get in any other way.
That is why out-of-bounds plays, usually shortened to inbounds plays, matter more than their number would suggest. Over a season, a team might run a few dozen of them in meaningful situations: after a timeout late in a quarter, in the final seconds of a close game, or when it needs a quick basket. In a tight contest those few possessions can decide the result. Coaches rehearse them in practice until they are automatic, and they keep a small library of options for different spots and different amounts of time.
This article explains the rules that govern inbounding, the difference between baseline and sideline sets, the common formations and their purposes, how defenses respond, and a few famous examples. It also explains the ideas that run through nearly every good inbounds play, so that a fan watching one can see what the coach is trying to do.
The rules that shape the play
Every inbounds play lives inside a handful of rules, and knowing them makes the plays easier to follow. The details vary by league, so the rulebook for the level you watch is the final authority.
- The time limit. The player throwing the ball in has five seconds to release it. Most levels use a five-second count, and a violation gives the ball to the other team.
- The inbounder's position. The inbounder must stay out of bounds until the ball is released, and may not step onto the court with the ball. After a made basket, he is generally allowed to move along the baseline. After other stoppages, he is typically limited to one spot along the line.
- The defender's limits. A defender may not reach over the line and touch the ball or the inbounder. A defender who is close, with his hands up, may still affect the pass, but he cannot interfere in ways that violate the rules.
- The ball must be touched. After the pass, the ball must touch an offensive player on the court before the inbounder may touch it. The inbounder cannot pass to himself.
- The clock. The game clock starts when a player on the court touches the ball. This is crucial in the final seconds, where the offense wants to use as little time as possible.
- The final fraction of a second. With a very small amount of time left, there are limits on what a player can do. In the NBA, if only a fraction of a second remains, a player cannot catch the ball and shoot, because there is not enough time on the clock, and the only way to score is to tip or deflect the ball into the basket in one motion. The exact threshold is described in the rulebook, and similar rules exist at other levels.
These rules explain why late-game inbounds plays look so different from ordinary ones. When the clock has less than a second, the play must be designed around the tip-in or the alley-oop, because a normal shot is not legal.
Baseline versus sideline
Out-of-bounds plays fall into two big groups, depending on where the ball is inbounded.
Baseline out of bounds
A baseline out-of-bounds play, often shortened to BLOB, takes place when the inbounder stands under or beside the basket. This happens after a made basket in some situations, or after the ball goes out over the baseline. In the half court, the baseline is the best place for a scoring play, because the inbounder is close to the basket. The offense can use the area under the hoop to set screens and free shooters.
The advantage of a baseline play is proximity. A pass to a player cutting under the basket can produce a layup. A lob can be thrown from the baseline to a big man at the rim. A screen near the lane can free a shooter, and the passing angles are short. The defense, meanwhile, faces the challenge of defending the basket and the perimeter at once, with an extra defender sometimes trapped behind the play.
Sideline out of bounds
A sideline out-of-bounds play, often SLOB, takes place when the ball goes out along the sideline. The inbounder stands on the side, usually in the frontcourt or backcourt depending on where the ball went out. A frontcourt SLOB is a common way to start a half-court play after a timeout. A backcourt SLOB is used when the team needs to move the ball to the frontcourt quickly.
The advantage is flexibility. Because the inbounder is on the side, the play can develop in many directions: toward the basket, toward the top of the key or toward the opposite wing. The sideline also provides a natural boundary, which keeps defenders from passing behind the inbounder.
Sideline plays tend to be longer than baseline plays, since the ball is farther from the basket. They often use more screens, and the goal may be to get the ball to the player who can create a good shot rather than to score directly.
Common formations
Coaches use dozens of formations, but several appear again and again. The names differ from team to team, but the ideas are shared.
The box
The box formation puts four offensive players in a square, usually around the lane, with the inbounder on the baseline. The corners of the box are the low blocks and the elbows. From this shape, the players can screen for each other, cut across the lane and pop out for shots. The box is flexible, because every player is near the others and the screens can be set in any direction. It is widely used for baseline plays.
Typical actions include a "screen the screener" play, in which one player sets a screen for a teammate and then receives a screen himself, and a lob to the rim. The defense has to guard four players in a tight space, which makes it hard to switch cleanly.
The stack
The stack puts offensive players in a line, one behind the other, usually near the lane or the three-point line. The line can be vertical, like a tower, or horizontal, along the baseline. The players then peel off in different directions, with one cutting to the basket, one popping to the wing, and so on.
The stack disguises the offense's intent. The defenders, who are also lined up behind their men, cannot tell which player will move first. The play often ends with a screener freeing a shooter, or with a lob to the player cutting to the rim. Stacks are common for both baseline and sideline plays.
The 1-4 low and 1-4 high
The 1-4 formations place one player near the ball, often the player who will receive the inbound pass, and four players in a line. In the 1-4 low, the line is near the baseline, with players across the lane. In the 1-4 high, it is higher, near the free-throw line. These sets are used to create screening opportunities along the line, such as down screens and cross screens.
The line
The line formation lines players along the lane, one behind the other. It resembles the stack but is more spread out. Players cut from the line to screens or to open spots, and the offense can run multiple options.
The diamond
In a diamond formation, the players form a shape with a player at each point, such as the elbows, the top and the low block. This creates an inside-out structure, with the ability to screen, cut or pop.
Spread formations
Some teams spread the floor to isolate a star. They place shooters around the arc, leaving space for a ball handler to catch and attack. These formations do not rely on screens as much, and are used when the team wants to get the ball to a particular player.
The main actions inside the formations
Whatever the formation, a handful of actions repeat.
- The lob. A pass thrown above the rim to a player cutting from the lane or the wing. The lob works best when the defense is focused on the ball or screens.
- The screen the screener. One player sets a screen for another and then receives a screen from a third player. It is the same principle as in the flex offense, and it frees a player the defense is not watching.
- The backdoor cut. A player fakes toward the ball and cuts behind the defender to the basket. Defenders who overplay the pass are vulnerable. The cut is a staple of the Princeton offense.
- The pin-down. A player runs from the lane along a screen toward the three-point line, catching the ball for a shot. It is a standard way to free a shooter.
- The flare. A shooter moves away from a screen toward the sideline or corner. It works when the defender goes over the screen the wrong way.
- The decoy. One or two players run actions that attract defenders, while the intended receiver cuts from another place. The decoy is often the key to a well-designed play.
- The quick inbound. In some situations, the inbounder simply passes to the nearest open teammate, and the team moves on. This is used when the defense is not set, or after a made basket.
Many plays combine these actions in sequence. A typical box play, for instance, might start with a pin-down, follow with a screen the screener, and end with a lob. The defense must be ready for all three, and a mistake on any of them leaves a player open.
Reading the defense
A good inbounds play is not just a script; it includes reads. The offense watches how the defense lines up and adjusts.
If the defense is playing man-to-man and sticking close to each player, the offense can use screens to create separation. If the defense switches everything, the offense can look for a mismatch, such as a big man guarding a guard, and attack it. If the defense is playing a zone, the offense can find the gaps with quick passes. And if the defense plays with an extra defender behind the play to protect against a lob, the offense can go to a different option.
Coaches often design plays with several options, so that the players can choose based on what the defense does. The first option is the one the coach hopes will work. The second option addresses the defense's most likely adjustment. The third is a safety valve, usually a pass to the inbounder or to a trusted ball handler to reset the play.
How defenses respond
Defending an inbounds play is a challenge, because the offense has the initiative. But defenses have several tools.
- Pressure the inbounder. A defender who stands in front of the inbounder, waving his arms, can disrupt the pass. In many situations the defender is not allowed to touch the ball, but his presence can make the passer hesitate.
- Deny the first pass. Defenders can play tight on the receivers, taking away the first option. If the first pass is denied, the inbounder has to look elsewhere, and the clock runs.
- Switch everything. Switching removes the benefit of screens, though it can create mismatches. Teams often switch inbounds plays, then adjust to the matchups.
- Play a free safety. One defender stays back, away from his man, to protect the basket or to intercept a lob. This is common in the final seconds, when a lob is likely.
- Guard the inbounder closely. In some situations, a defender stays in front of the inbounder to prevent the ball from being thrown in at all.
- Communicate. Defenders shout out screens and cuts, and warn each other of dangers. Communication is the most important defensive skill on these plays.
A defender's mistakes are visible: a lost man, a late switch, a gap in the lane. The best defenses minimize them, but the offense has the advantage.
Famous inbounds moments
Several moments in basketball history show how an out-of-bounds play can change a game.
In the 1992 NCAA tournament, Duke trailed Kentucky in the East Regional final in overtime. With just over two seconds left, Grant Hill threw a long pass from the baseline to Christian Laettner, who caught the ball at the free-throw line, turned and hit a jump shot at the buzzer. The game is remembered as one of the greatest in college history. The play shows the power of a long pass thrown with accuracy to a player who is ready, and of a defense that cannot stop both a long throw and a shot.
In the 2004 NBA playoffs, in a series between the Lakers and the Spurs, San Antonio went ahead on a Tim Duncan shot with 0.4 seconds left in Game 5. The Lakers then ran an inbounds play, and Derek Fisher caught the ball and shot it in a single motion for the win. The play worked because it was designed for the tiny amount of time, with a pass that arrived at the right moment. The piece on the Lakers' history places that era in context.
These plays show different ideas: one a long, high-risk pass, the other a short, precise action. What they share is preparation. Neither would have worked without practice.
Time and score: choosing the play
The right play depends on how much time is left and what the team needs.
- A lot of time. The team can run a full set, with multiple screens and options.
- Ten seconds or fewer, needing a basket. The play should be quick and direct, with a clear first option and a fast second.
- Needing a three. The play should free a shooter beyond the arc, often with screens on the perimeter.
- Less than two seconds. The play must produce a shot almost immediately, often a lob or a catch-and-shoot.
- Less than a second. The play is a tip-in or alley-oop, because a catch-and-shoot is not legal at that point in the NBA.
- Protecting a lead. The team should inbound safely and avoid turnovers, often by designating a trusted ball handler.
Coaches use timeouts to set up these plays, and the article on after-timeout plays covers how they design them.
A way of seeing it
There is a way of looking at inbounds plays that explains why they work. Out-of-bounds plays are not really about the screens or cuts. They are about timing and misdirection.
Consider what a defense has to do. It must know where every offensive player is, what each is likely to do and how to respond. It has only a few seconds to do this, and the offense has already settled on a plan. The offense uses its time advantage to create confusion: a screen here, a cut there, a decoy somewhere else. By the time the defense understands the plan, it is too late.
This means that the best inbounds plays are often the ones that look simplest. A well-timed lob or a quick pin-down needs no elaborate setup. The complexity comes from the details of timing: when the screen is set, when the cut begins, when the pass is thrown. A fraction of a second early or late can ruin the play.
It also explains why coaches value the inbounder. The player who throws the ball in must read the defense, find the open man and deliver on time. A great passer, one who can fire a pass through a gap, makes the whole play work.
What to take away
Inbounds plays turn a dead ball into a scripted opportunity. Baseline sets use the proximity of the basket, sideline sets provide flexibility, and formations like the box, stack and 1-4 organize screens, cuts and lobs. The rules, including the five-second count and the limits near the end of the clock, shape the design. The best plays come with options, and the best teams practice until the timing is automatic.
When you watch a game, give extra attention to the first few seconds after the ball goes out of bounds. Notice where the players line up, who sets the screens and who the intended receiver is. See how the defense reacts. You will start to recognize the sets, and you will understand why coaches spend so much practice time on them.
For close finishes and last-second shots, the scores and playoffs pages are a good place to follow how games are decided.